1. product pro?le 1.1 general description ultra low capacitance double rail-to-rail electrostatic discharge (esd) protection diode in a small sot143b surface mounted device (smd) plastic package designed to protect two hi-speed data lines or high frequency signal lines from the damage caused by esd and other transients. PRTR5V0U2X incorporates two pairs of ultra low capacitance rail-to-rail diodes as well as an additional esd protection diode to ensure signal line protection even if no supply voltage is available. 1.2 features n esd protection of two hi-speed data lines or high frequency signal lines n ultra low input to ground capacitance: c (i/o-gnd) = 1 pf n esd protection up to 8 kv n iec 61000-4-2, level 4 (esd) n very low clamping voltage due to an integrated additional esd protection diode n very low leakage current n small 4 lead sot143b smd plastic package 1.3 applications n usb 2.0 ports n digital video interface (dvi) / high de?nition multimedia interface (hdmi) interfaces n mobile and cordless phones n personal digital assistants (pda) n digital cameras n wide area network (wan) / local area network (lan) systems n pcs, notebooks, printers and other pc peripherals PRTR5V0U2X ultra low capacitance double rail-to-rail esd protection diode in sot143b rev. 01 22 september 2005 product data sheet ( datasheet : )
9397 750 15163 ? koninklijke philips electronics n.v. 2005. all rights reserved. product data sheet rev. 01 22 september 2005 2 of 10 philips semiconductors PRTR5V0U2X ultra low capacitance double rail-to-rail esd protection diode 1.4 quick reference data 2. pinning information 3. ordering information 4. marking [1] * = -: made in hong kong * = p: made in hong kong * = t: made in malaysia * = w: made in china table 1: quick reference data symbol parameter conditions min typ max unit v rwm reverse stand-off voltage - - 5.5 v c (i/o-gnd) input to ground capacitance; pin 2 and 3 to ground f = 1 mhz; v (i/o-gnd) =0v -1-pf c sup supply capacitance; pin 4 to ground f = 1 mhz; v cc = 0 v - 16 - pf table 2: pinning pin description simpli?ed outline symbol 1 gnd 2 i/o 1 3 i/o 2 4v cc 2 1 3 4 006aaa482 4 1 3 2 table 3: ordering information type number package name description version PRTR5V0U2X - plastic surface mounted package; 4 leads sot143b table 4: marking codes type number marking code [1] PRTR5V0U2X *r1
9397 750 15163 ? koninklijke philips electronics n.v. 2005. all rights reserved. product data sheet rev. 01 22 september 2005 3 of 10 philips semiconductors PRTR5V0U2X ultra low capacitance double rail-to-rail esd protection diode 5. limiting values table 5: limiting values in accordance with the absolute maximum rating system (iec 60134). symbol parameter conditions min max unit t amb ambient temperature - 40 +85 c t stg storage temperature - 55 +125 c table 6: esd standards compliance standard conditions iec 61000-4-2; level 4 (esd) > 8 kv (contact) fig 1. esd pulse waveform according to iec 61000-4-2 001aaa631 i pp 100 % 90 % t 30 ns 60 ns 10 % t r = 0.7 ns to 1 ns
9397 750 15163 ? koninklijke philips electronics n.v. 2005. all rights reserved. product data sheet rev. 01 22 september 2005 4 of 10 philips semiconductors PRTR5V0U2X ultra low capacitance double rail-to-rail esd protection diode 6. characteristics table 7: characteristics t amb = 25 c unless otherwise speci?ed. symbol parameter conditions min typ max unit v rwm reverse stand-off voltage - - 5.5 v i r reverse current; pin 2, 3 and 4 to ground v r = 3 v - < 1 100 na v br breakdown voltage; pin 4 to ground 6 - 9 v c (i/o-gnd) input to ground capacitance; pin 2 and 3 to ground f = 1 mhz; v (i/o-gnd) =0v -1-pf c (i/o-i/o) input to input capacitance; pin 2 to pin 3 f = 1 mhz; v (i/o-i/o) = 0 v - 0.6 - pf c sup supply capacitance; pin 4 to ground f = 1 mhz; v cc = 0 v - 16 - pf v f forward voltage - 0.7 - v f = 1 mhz; t amb = 25 c f = 1 mhz; t amb = 25 c fig 2. input to ground capacitance as a function of input to ground voltage; typical values fig 3. input to input capacitance as a function of input to input voltage; typical values v (i/o-gnd) (v) 05 4 23 1 006aaa483 0.8 1.2 0.4 1.6 2.0 c (i/o-gnd) (pf) 0 v (i/o-i/o) (v) 05 4 23 1 006aaa484 0.4 0.6 0.2 0.8 1.0 c (i/o-i/o) (pf) 0
9397 750 15163 ? koninklijke philips electronics n.v. 2005. all rights reserved. product data sheet rev. 01 22 september 2005 5 of 10 philips semiconductors PRTR5V0U2X ultra low capacitance double rail-to-rail esd protection diode fig 4. esd clamping test setup and waveforms 006aaa486 50 w r z c z PRTR5V0U2X vertical scale = 200 v/div horizontal scale = 50 ns/div unclamped + 1 kv esd voltage waveform (iec 61000-4-2 network) clamped + 1 kv esd voltage waveform (iec 61000-4-2 network) unclamped - 1 kv esd voltage waveform (iec 61000-4-2 network) clamped - 1 kv esd voltage waveform (iec 61000-4-2 network) vertical scale = 200 v/div horizontal scale = 50 ns/div vertical scale = 10 v/div horizontal scale = 50 ns/div gnd gnd gnd gnd 450 w rg 223/u 50 w coax esd tester iec 61000-4-2 network c z = 150 pf; r z = 330 w 4 ghz digital oscilloscope 10 attenuator dut device under test vertical scale = 10 v/div horizontal scale = 50 ns/div
9397 750 15163 ? koninklijke philips electronics n.v. 2005. all rights reserved. product data sheet rev. 01 22 september 2005 6 of 10 philips semiconductors PRTR5V0U2X ultra low capacitance double rail-to-rail esd protection diode 7. application information handling data rates up to 480 mbit/s, usb 2.0 interfaces require esd protection devices with an extremely low line capacitance in order to avoid signal distortion. with a capacitance of only 1 pf, the philips PRTR5V0U2X offers iec 61000-4-2, level 4 compliant esd protection. the PRTR5V0U2X integrates two ultra-low capacitance rail-to-rail esd protection diodes and an additional esd protection diode in a small 4 lead sot143b package. the additional esd protection diode connected between ground and v cc prevents charging of the supply. to achieve the maximum esd protection level, no additional external capacitors are required. circuit board layout and protection device placement circuit board layout is critical for the suppression of esd, electrical fast transient (eft) and surge transients. the following guidelines are recommended: 1. place the PRTR5V0U2X as close to the input terminal or connector as possible. 2. the path length between the PRTR5V0U2X and the protected line should be minimized. 3. keep parallel signal paths to a minimum. 4. avoid running protected conductors in parallel with unprotected conductors. 5. minimize all printed-circuit board conductive loops including power and ground loops. 6. minimize the length of the transient return path to ground. 7. avoid using shared transient return paths to a common ground point. 8. ground planes should be used whenever possible. for multilayer printed-circuit boards, use ground vias. fig 5. application diagram: usb 2.0 006aaa485 d + d - d + d - gnd usb controller common mode choke protected ic/device v bus v bus
9397 750 15163 ? koninklijke philips electronics n.v. 2005. all rights reserved. product data sheet rev. 01 22 september 2005 7 of 10 philips semiconductors PRTR5V0U2X ultra low capacitance double rail-to-rail esd protection diode 8. package outline 9. packing information [1] for further information and the availability of packing methods, see section 15 . fig 6. package outline sot143b 04-11-16 dimensions in mm 3.0 2.8 1.1 0.9 2.5 2.1 1.4 1.2 1.7 1.9 0.48 0.38 0.15 0.09 0.45 0.15 0.88 0.78 2 1 3 4 table 8: packing methods the indicated -xxx are the last three digits of the 12nc ordering code. [1] type number package description packing quantity 3000 10000 PRTR5V0U2X sot143b 4 mm pitch, 8 mm tape and reel -215 -235
9397 750 15163 ? koninklijke philips electronics n.v. 2005. all rights reserved. product data sheet rev. 01 22 september 2005 8 of 10 philips semiconductors PRTR5V0U2X ultra low capacitance double rail-to-rail esd protection diode 10. revision history table 9: revision history document id release date data sheet status change notice doc. number supersedes PRTR5V0U2X_1 20050922 product data sheet - 9397 750 15163 -
philips semiconductors PRTR5V0U2X ultra low capacitance double rail-to-rail esd protection diode 9397 750 15163 ? koninklijke philips electronics n.v. 2005. all rights reserved. product data sheet rev. 01 22 september 2005 9 of 10 11. data sheet status [1] please consult the most recently issued data sheet before initiating or completing a design. [2] the product status of the device(s) described in this data sheet may have changed since this data sheet was published. the l atest information is available on the internet at url http://www.semiconductors.philips.com. [3] for data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 12. de?nitions short-form speci?cation the data in a short-form speci?cation is extracted from a full data sheet with the same type number and title. for detailed information see the relevant data sheet or data handbook. limiting values de?nition limiting values given are in accordance with the absolute maximum rating system (iec 60134). stress above one or more of the limiting values may cause permanent damage to the device. these are stress ratings only and operation of the device at these or at any other conditions above those given in the characteristics sections of the speci?cation is not implied. exposure to limiting values for extended periods may affect device reliability. application information applications that are described herein for any of these products are for illustrative purposes only. philips semiconductors make no representation or warranty that such applications will be suitable for the speci?ed use without further testing or modi?cation. 13. disclaimers life support these products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. philips semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify philips semiconductors for any damages resulting from such application. right to make changes philips semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. when the product is in full production (status production), relevant changes will be communicated via a customer product/process change noti?cation (cpcn). philips semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise speci?ed. 14. trademarks notice all referenced brands, product names, service names and trademarks are the property of their respective owners. 15. contact information for additional information, please visit: http://www.semiconductors.philips.com for sales of?ce addresses, send an email to: sales.addresses@www.semiconductors.philips.com level data sheet status [1] product status [2] [3] de?nition i objective data development this data sheet contains data from the objective speci?cation for product development. philips semiconductors reserves the right to change the speci?cation in any manner without notice. ii preliminary data quali?cation this data sheet contains data from the preliminary speci?cation. supplementary data will be published at a later date. philips semiconductors reserves the right to change the speci?cation without notice, in order to improve the design and supply the best possible product. iii product data production this data sheet contains data from the product speci?cation. philips semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. relevant changes will be communicated via a customer product/process change noti?cation (cpcn).
? koninklijke philips electronics n.v. 2005 all rights are reserved. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. no liability will be accepted by the publisher for any consequence of its use. publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. date of release: 22 september 2005 document number: 9397 750 15163 published in the netherlands philips semiconductors PRTR5V0U2X ultra low capacitance double rail-to-rail esd protection diode 16. contents 1 product pro?le . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 general description. . . . . . . . . . . . . . . . . . . . . . 1 1.2 features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.3 applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.4 quick reference data. . . . . . . . . . . . . . . . . . . . . 2 2 pinning information . . . . . . . . . . . . . . . . . . . . . . 2 3 ordering information . . . . . . . . . . . . . . . . . . . . . 2 4 marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 5 limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 6 characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 4 7 application information. . . . . . . . . . . . . . . . . . . 6 8 package outline . . . . . . . . . . . . . . . . . . . . . . . . . 7 9 packing information. . . . . . . . . . . . . . . . . . . . . . 7 10 revision history . . . . . . . . . . . . . . . . . . . . . . . . . 8 11 data sheet status . . . . . . . . . . . . . . . . . . . . . . . . 9 12 de?nitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 13 disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 14 trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 15 contact information . . . . . . . . . . . . . . . . . . . . . 9
|
